Filter Carts

Filter carts are ideal for use on small to medium-sized reservoirs with low flow rates. Compatible with mineral-based industrial fluids, portable systems such as the filter cart provide a cost effective solution to maintaining fluid cleanliness in multiple applications with the same lubricant.

Heavy duty, lots of options, exceptional value… Des-Case filter carts are uniquely yours, because you pick the options you need for your specific environment and application. Build yours today by contacting us.

CE_logo.png

  • Automatic pressure relief valve
  • Non-bypass filter heads which prevent particles from passing by when the filters reach maximum saturation
  • Dual-stage filtration
  • 12' hose assemblies with various quick connect options
  • Pneumatic wheels for easy mobility
  • Industrial powder-coated paint
  • Heavy-duty cart with oil catch pan
  • One-year warranty
  • 25 ft cord (for electric motors only)
  • Decontaminating systems
  • Flushing new or repaired systems
  • Dispensing new oil
  • Pre-filtering new oil
  • Evacuating used oil
  • Reservoir top-offs
  • Flushing systems
  • Collecting oil samples for analysis
Intended Use
  • To be used for offline, secondary filtration and not inline filtration
  • In general industrial environments, both indoors and outdoors (IP rating of 54)
  • For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 680 at 100°F/38°C (3,000 ssu/648cSt) within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C)
  • Placed at the same level or below the equipment being filtered and within reach of the recommended standard 12 foot hoses
  • This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source

 

Operating Temperatures:

  • -40°F to 150°F (-40°C to 66°C) for standard unit with clear PVC hoses
  • -20°F to 212°F (-28°C to 100°C) for custom unit with hydraulic hoses and Viton or EPDM seals

Materials:

  • Frame: Carbon Steel
  • Paint: Industrial Powder Coat
  • Filter Heads: Aluminum
  • Fittings: Zinc Plated Steel and/or Brass
  • Pumps: Aluminum/Steel
  • Hoses: Clear PVC with steel wire or hydraulic hose
  • Gaskets: Buna-N

Filter Indicators:

  • Filter indicator pops at 22 psid (1.55 bar) as warning that filter elements need to be replaced

Pump Relief:

  • Opens at 65 psi (5.49 bar)

Weight:

  • Approximately 100-150 lbs (45-68 kg). Will vary depending on options selected.

Dimensions:

  • 18.8" L x 21.5" W x 45.7" H

Viscosity Range:

  • Up to ISO VG 680 at 100°F / 38°C (3000 ssu / 648 cSt)

Replacement Filter Element Part Numbers:

PART # DESCRIPTION
FC-AF 3-micron Filter Element
FC-BF 6-micron Filter Element
FC-CF 12-micron Filter Element
FC-DF 25-micron Filter Element
FC-JF Water Adsorption Filter Element

 

Elements are sold in cases of six and can be mixed and matched.

Find a Distributor